Specifications

58 en | LCD Keypad Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
5.6 Partitioning a Logical Drive/Logical Volume
Partitioning and the creation of a logical volume, are not requirements for creating a RAID sys-
tem. The configuration processes for partitioning a logical drive are the same as those for par-
titioning a logical volume.
Press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select
"View and Edit Logical Volume," then press ENT.
Use the up or down arrow keys to select a logical volume, then press ENT.
Use the up or down arrow keys to select “Partition Logical Volume,” then press ENT.
The total capacity of the logical volume will be displayed as one partition. Press ENT for two
seconds to change the size of the first partition.
Use the up or down arrow keys to change the number of the flashing digit, (see the arrow
mark) then press ENT to move to the next digit. After changing all the digits, press ENT for two
seconds to confirm the capacity of this partition. You may also use arrow keys to move down
to the next partition to configure more partitions.
The rest of the drive space will be automatically allocated as the last partition. You may go on
to create up to 16 partitions using the same method described above.
Press ESC several times to go back to the Main Menu.
i
NOTICE!
If operated with a Unix-based system, reset the subsystem for the configuration to take effect
if any changes have been made to partition sizes and partition arrangement.