Specifications

52 en | LCD Keypad Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
5.4 Creating a Logical Drive
To create a logical drive, press ENT for two seconds to enter the Main Menu. Use the up or
down arrow keys to navigate through the menus. Choose "View and Edit Logical Drives," and
then press ENT.
Press the up or down arrow keys to select a logical drive entry, then press ENT for two sec-
onds to proceed. "LG" is short for Logical Drive.
5.4.1 Choosing a RAID Level
Press the up or down arrow keys to choose the desired RAID level, then press ENT for two
seconds. "TDRV" (Total Drives) refers to the number of all available drives.
5.4.2 Choosing Member Drives
Press ENT for two seconds; the message, “RAID X selected To Select drives”, will prompt.
Confirm your selection by pressing ENT.
Press ENT, then use the up or down arrow keys to browse through the available drives. Press
ENT again to select/deselect the drives. An asterisk (*) mark will appear on the selected
drive(s). To deselect a drive, press ENT again on the selected drive. The (*) mark will disap-
pear.
After all the desired drives have been selected, press ENT for two seconds to continue.
5.4.3 Logical Drive Preferences
You may also choose “Change Logical Drive Parameter,” then press ENT to change related
parameters before initializing the logical drive.