Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Screen Messages | en 45
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
4.6 Channel Status
Host Channel
Fig. 4.6 Host Channel Status Screen
Drive Channel (Single Controller Configuration)
Fig. 4.7 Drive Channel Status Screen
Channel Mode:
Host Host channel mode
Drive Drive channel mode
Default SCSI Bus Sync Clock:
160M The default setting of this channel is set to the 160Mhz mode
Async, 2.5 to 160Mhz Data rate can be manually configured if the need arises
Available Host IDs:
* Multiple IDs applied (Host channel mode only)
(ID number) Controller is using this ID for host LUN mapping.
NA No ID applied