Specifications

42 en | LCD Screen Messages SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
4 LCD Screen Messages
4.1 The Initial Screen
Fig. 4.1 LCD Initial Screen
Status/Data Transfer Indicator:
4.2 Quick Installation Screen
Bild einfügen: Quick_Installation_Screen
Fig. 4.2 Quick Installation Screen
Press [ENT] to create a logical drive. The subsystem/controller will start initialization of one
logical drive to include all connected disk drives and automatically map the logical drive to the
first ID and LUN number of the first host channel. The “Quick Installation” can only be per-
formed when there is no logical drive.
Ready There is at least one logical drive or logical vol-
ume mapped to a host ID/LUN combination.
No Host LUN No logical drive created or the logical drive has
not yet been mapped to any host ID/LUN.
Indicates the statistic of internal processing
resources, not the host bus throughput. Each
block indicates 256Kbytes of data being pro-
cessed.