Specifications

226 en | Event Messages SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Message Peripheral Set 0 Device NOTICE: FAN 1 Back On-Line(_RPM)
What Happens? An individual cooling fan once missing or failed is restored, and the
PRM reading displays. This applies to enclosure implementations using
cooling fans capable of reporting rotation speed.
What to Do? Press ESC to clear this message.
Message SES(C0 I0) Cooling Fan 1:Fan Back On-Line
What Happens? A cooling fan once missing or failed is restored. This message is
reported through an SES monitoring device.
What to Do? Press ESC to clear this message.
Message Peripheral Set 0 Device NOTICE: FAN 1 Back On-Line
What Happens? An individual cooling fan once missing or failed is restored.
What to Do? Press ESC to clear this message.
Message SAF-TE Device(1) NOTICE: Temperature Back To Non-Critical LVs
What Happens? Operating temperature back within normal temperature range.
What to Do? Press ESC to clear this message.
Message Peripheral Set 0 Device NOTICE: Temperature 1 Back To Non-Critical
LVs
What Happens? Temperature sensor 1 reports operating temperature is now within
normal temperature range.
What to Do? Press ESC to clear this message.
Message Peripheral Set 0 Device NOTICE: Temperature 1 is Present
What Happens? Temperature sensor 1 once missing and is now present on the serial
bus.
What to Do? Press ESC to clear this message.
Message Peripheral Set 0 Device NOTICE: Temperature 1 Back To Non-Critical
LVs (_(C)
What Happens? Temperature sensor 1 reports operating temperature is now within
normal temperature range and the Celsius reading displays.
What to Do? Press ESC to clear this message.
Message SES(C0 I0) Temp Sensor 1: Temperature Back to Non Critical LVs
What Happens? Temperature sensor 1 reports operating temperature is now within
normal temperature range.
What to Do? Press ESC to clear this message.
Message SAF-TE Device(1) NOTICE: Power Supply Back On-Line (Idx:4)
What Happens? A power supply once missing or failed is now restored. This event is
reported through the SAF-TE monitoring interface.
What to Do? Press ESC to clear this message.