Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Event Messages | en 221
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
Notification
Message CHL:_ ID:_ NOTICE: Media Error Recovered-0xD8001C7C
What Happens? Data once stored on bad drive sectors has been successfully re-con-
ducted from adjacent data blocks/stripes onto the original drive blocks
or distributed onto other healthy sectors.
** Bosch firmware translates SATA error codes into SCSI standard
sense keys and sense codes. That’s the error codes at the end of mes-
sage.
What to Do? Press ESC to clear the message.
Message CHL:_ ID:_ NOTICE: Redundant Path for CHL:_ Restored
What Happens? Redundant path, one of the drive-side loop members, for CHL:_ ID:_ is
restored.
What to Do? Check proper host- or drive-side activities. Press ESC to clear the mes-
sage.
Message CHL:_ NOTICE: Redundant Path for CHL:_ ID:_ Restored
What Happens? The redundant path (CHL:_) connecting drive (CHL:_ ID:_) is restored.
What to Do? Check proper host- or drive-side activities. Press ESC to clear the mes-
sage.
Message CHL:_ ID:_ Drive NOTICE: Drive Recovered Error Reported
What Happens? Hard drive unrecoverable media error reported. A bad block is encoun-
tered in the specified hard drive. The RAID controller will ask the hard
drive to retry.
What to Do? Press [ESC] to clear the message.
Message CHL:_ LIP(FF B) Detected
What Happens? A LIP is issued on CHL:_.
What to Do? Check proper host- or drive-side activities. Press ESC to clear the mes-
sage.
Message CHL:_ Host Channel Notification: Bus Reset Issued.
What Happens? Bus reset on the CHL:_ host channel.
What to Do? Check proper host- or drive-side activities. Press ESC to clear the mes-
sage.
Message CHL:_ ID:_ Drive NOTICE: Scan Drive Successful
What Happens? A new drive or a replacement drive has been successfully scanned/rec-
ognized by the subsystem.
What to Do? Press ESC to clear the message.