Manualshelf

Specifications

ManualsBrandsCompex ManualsComputer equipmentSCSI TO S-ATA RAID
211212213214215216217218219220
SCSI to SATA RAID Subsystem | Administrator’s Manual Event Messages | en 213
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
Message LG:0 Logical Drive NOTICE: Add Drive Operation Paused
What Happens?
The add drive expansion process is halted by:
1. Logical drive expansion is canceled by a user.
2. One of the member drives failed during logical drive expansion.
3. Media errors are found on one or more of the logical drive mem-
bers.
4. System faults have occurred.
What to Do? Carefully identify and replace the faulty drive and correct system faults.
The add drive expansion should continue once the faults are corrected.
Message LG:0 Logical Drive NOTICE: Add Drive to Logical Drive Completed
What Happens? The add drive expansion process is completed.
What to Do? Press ESC to clear the message. Please remember to rearrange the
added capacity which will appear as a new partition volume.
Message NOTICE: CHL:0 ID:132 Starting Media Scan
What Happens? Media Scan is manually or automatically started by the preset Task
Schedules on a specific disk drive.
What to Do? Press ESC to clear the message.
Message LG:0 NOTICE: CHL:0 ID:132 Starting Media Scan
What Happens? Media Scan is manually or automatically started by the preset Task
Schedules on a specific member of Logical Drive 0.
What to Do? Press ESC to clear the message.
Message NOTICE: Media Scan of CHL:0 ID:132 Completed
What Happens? Media Scan on a specific disk drive is completed.
What to Do? Press ESC to clear the message.
Message LG:0 NOTICE: Media Scan of CHL:0 ID:132 Completed
What Happens? Media Scan on a specific member of Logical Drive 0 is completed.
What to Do? Press ESC to clear the message.
Message LG:0 Logical Drive NOTICE: CHL:0 ID:132 Continue Clone Operation
What Happens? The target logical drive has been restored to its previous status, e.g., a
failed drive is restored, and the cloning process can continue.
What to Do? Press ESC to clear the message.
Message LG:0 Logical Drive NOTICE: CHL:0 ID:132 Starting Clone
What Happens? Cloning process started on one of the members of Logical Drive 0
What to Do? Press ESC to clear the message.