Specifications

208 en | Event Messages SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Message LG:0 Logical Drive ALERT: Expansion Aborted
What Happens?
Logical drive expansion failed. It could result from one of the following
reasons:
1. The expansion has been canceled by a user.
2. The drive used for expansion might have failed during expansion.
3. Media errors are encountered on another member drive during the
expansion process.
4. One member drive has failed.
5. Drive hardware faults occurred.
What to Do? Carefully identify and replace the faulty drive and perform logical drive
expansion again.
Message LG:0 Logical Drive ALERT: Expansion Failed
What Happens?
Logical drive initialization failed. It could result from one of the follow-
ing reasons:
1. The drive(s) used for expansion might have failed during expan-
sion.
2. Media errors are encountered on another member drive during the
expansion process.
3. One member drive has failed.
4. Drive hardware faults occurred.
What to Do? Carefully identify and replace the faulty drive and perform logical drive
expansion again.
Message LG:0 ALERT: CHL:0 ID:132 Media Scan Failed
What Happens? Media Scan failed to carry on with scanning drive(s) for certain reasons,
e.g., a logical drive or a disk drive has fatally or physically failed.
What to Do? Carefully identify and replace the faulty drive if rebuild is possible.
Message LG:0 ALERT: CHL:0 ID:132 Media Scan Aborted
What Happens? Media Scan operation is aborted for certain reasons, e.g., it has been
manually canceled.
What to Do? Check disk drive and system operation status.
Message LG:0 Logical Drive ALERT: CHL:0 ID:132 Clone Failed
What Happens?
Drive cloning failed. It could result from one of the following reasons:
1. Cloning has been manually canceled by a user.
2. The drive used for cloning might have failed during the cloning pro-
cess.
3. Bad blocks are encountered on another member drive during the
cloning process.
4. The source drive has failed.
5. System faults occurred.
What to Do?
Carefully identify and replace the faulty drive.