Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Event Messages | en 207
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
Message LG:0 Logical Drive ALERT: Parity Regeneration Aborted
What Happens? System faults or integrity problems forced system to abandon the opera-
tion. Irrecoverable parity inconsistency may also cause a halt to the oper-
ation.
What to Do? Check proper system working conditions. Contact system vendor for
help.
Message LG:0 Logical Drive ALERT: Parity Regeneration Failed
What Happens? System faults or integrity problems forced system to abandon the opera-
tion. Irrecoverable parity inconsistency may also cause a halt to the oper-
ation.
What to Do? Check proper system working conditions. Contact system vendor for
help.
Message LG:0 Logical Drive ALERT: Creation Aborted
What Happens? Logical drive creation process manually aborted or that some system
integrity problems forced the subsystem to abort logical drive creation
process.
What to Do? Check proper system working conditions.
Message LG:0 Logical Drive ALERT: Creation Failed
What Happens? Logical drive creation process failed when one or more drive members
failed or have been accidentally removed. Drive abnormality may also be
the cause of the problems.
What to Do? Check proper system working conditions and drive connection. Replace
the faulty drives and repeat the creation process.
Message LG:0 Logical Drive ALERT: Initialization Failed
What Happens?
Logical drive initialization failed.It could result from one of the following
reasons:
1. 1. One of the disk drives used for a logical drive might have failed
during rebuild.
2. 2. Media errors are encountered on another member drive during
the initialization process.
3. 3. Drive hardware faults occurred.
What to Do? Carefully identify and replace the faulty drive and perform logical drive
initialization again.