Specifications

200 en | Event Messages SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
16 Event Messages
The controller events can be categorized as follows according to the severity levels:
The RAID subsystem records all system events from power on, it can record up to 1,000
events. To power off or to reset the controller will cause an automatic deletion of all the
recorded event logs.
The RAIDWatch manager can be used to record events on multiple subsystems especially
when controller reset or power-off is an expected action. The events can also be seen from
RAIDWatch’s Configuration Client utility. Associated details can be found in the RAIDWatch
user's manual and online help.
Descriptions below may contain abbreviations. Abbreviations and Capitalized letters are pre-
served for the coherency with the event messages shown on LCD screen or terminal.
16.1 Event Index
16.1.1 Logical Drive Events
Critical
LG:0 Logical Drive ALERT: CHL:0 ID:132 Drive Missing
LG:0 Logical Drive ALERT: CHL:0 ID:132 Drive Failure
LG:0 Logical Drive ALERT: Rebuild Aborted
LG:0 Logical Drive ALERT: Rebuild Failed
LG:0 Logical Drive ALERT: Parity Regeneration Aborted
LG:0 Logical Drive ALERT: Parity Regeneration Failed
LG:0 Logical Drive ALERT: Creation Aborted
LG:0 Logical Drive ALERT: Creation Failed
LG:0 Logical Drive ALERT: Initialization Failed
LG:0 Logical Drive ALERT: Expansion Aborted
LG:0 Logical Drive ALERT: Expansion Failed
ALERT: CHL:0 ID:132 Media Scan Failed
LG:0 ALERT: CHL:0 ID:132 Media Scan Failed
LG:0 Logical Drive ALERT:CHL:0 ID:132 Clone Failed
LG:0 Logical Drive ALERT:CHL:0 ID:132 Clone Aborted
LG:0 Logical Drive ALERT:CHL:0 ID:132 Clone Failed
LG:0 Logical Drive ALERT:CHL:0 ID:132 Clone Aborted
LG:0 Logical Drive ALERT: Logical Drive Bad Block Table FULL
LG:0 Logical Drive ALERT: Logical Drive Bad Block Table BAD
LG:0 Logical Drive ALERT: Logical Drive On-Line Init Table BAD
LG:0 Logical Drive ALERT: Bad Data Block Marked 000000084
LG:0 Logical Drive ALERT: UNPROTECTED Block Marked 000000084
LG:0 Logical Drive NOTIFY: Bad Data Block Encountered 000000084
LG:0 ALERT: Inconsistent Parity Encountered Block 20000000B
Notification
LG:0 Logical Drive NOTICE: Continue Rebuild Operation
LG:0 Logical Drive NOTICE: Starting Rebuild
LG:0 Logical Drive NOTICE: Rebuild of Logical Drive Completed
Critical Errors that need to attend to immediately
Warning Errors
Notification Command processed message sent from Firmware