Specifications

178 en | S.M.A.R.T. Configuration SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
The controller will automatically start the cloning process using the existing “stand-by” (local/
global spare drive) to clone the source drive (the target member drive).
The cloning process will begin with a notification message:
Fig. 12.7 Notice Starting Clone Status
Press [ESC] to view the current progress:
Fig. 12.8 Cloning Progress Status
You may quit viewing the status bar by pressing [ESC] to return to the previous menu. Select
the drive indicated as “CLONING” by pressing [ENTER]. Select “Clone Failing Drive” again to
view the progress. You may identify the source drive and choose to “View Clone Progress” or
“Abort Clone” if you happen to have selected the wrong drive.
Fig. 12.9 Identify The Source Drive
The cloning progress will be completed by a notification message as displayed below:
Fig. 12.10 Notice Clone Completed
You may press [ESC] to clear the notification message to see the drives’ status after the clon-
ing process. The source drive (Channel 1 ID 5) remains as a member of logical drive “0,” and
the “stand-by” drive (Channel 1 ID 2, the dedicated/global spare drive) has become a
“CLONE” drive.
Fig. 12.11 View the Drive Status