Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Array Expansion | en 167
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
Fig. 11.11 Select Source Drive
Select one of the members as the "source drive" (status indicated as ON-LINE) by pressing
[ENTER]; a table of available drives will prompt. Select a "new drive" to copy the capacity of
the source drive onto. The channel number and ID number of both the “Source Drive” and the
“Destination Drive” will be indicated in the confirming box.
Fig. 11.12 Confirm Copy and Replace Drive
Choose Yes to confirm and proceed.
Fig. 11.13 Notice Starting Clone
Press [ESC] to view the progress.
Fig. 11.14 View Copy and Replace Progress
Completion of the Copy and Replace process will be indicated by a notification message. Fol-
low the same method to copy and replace every member drive. You may now perform “Expand
Logical Drive” to make use of the added capacity, and then map the additional capacity to a
host LUN.
Fig. 11.15 Completed Copy and Replace