Specifications

164 en | Array Expansion SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Press [ENTER] to select a logical drive and choose “Add Drives” from the submenu. Proceed
with confirming the selection.
Fig. 11.4 Choose Add Drives Function
Available drives will be listed. Select one or more drive(s) to add to the target logical drive by
pressing [ENTER]. The selected drive will be indicated by an asterisk “
*
” mark.
Fig. 11.5 Select Drives
Press [ESC] to proceed and the notification will prompt.
Fig. 11.6 Notice Starting Add Drive Operation
Press [ESC] again to cancel the notification prompt; a status bar will indicate the percentage
of progress.
Fig. 11.7 View the Percentage of Progress
Upon completion, there will appear a confirming notification. The capacity of the added drive
will appear as an unused partition.