Specifications

160 en | Data Integrity SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Fig. 10.18 Configure Verification on Write
Move the cursor bar to the desired item, then press [ENTER].
Fig. 10.19 Enable Verification on LD Initialization Writes
Choose Yes in the confirm box to enable or disable the function. Follow the same procedure
to enable or disable each method.
i
NOTICE!
The “verification on Normal Drive Writes” method will affect the “write” performance of your
RAID system.