Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Enclosure Management | en 149

Bosch Security Systems F.01U.027.802 | V1 | 2006.11

9.2 SAF-TE and SES Enclosure Monitoring

9.2.1 Periodic SAF-TE and SES Device Check Time

Fig. 9.10 Set SAF-TE and SES Check Time

If there are remote components in your RAID enclosure being controlled via SAF-TE/S.E.S.

devices, use this function to select how often the controller will check the status of these

devices. Choose “Periodic SAF-TE and SES Device Check Time”; then press [ENTER]. Move

the cursor to the desired interval, then press [ENTER]. Choose Yes in the dialog box that fol-

lows to confirm the setting.

9.2.2 Enclosure Devices Status: View Peripheral Device Status

Select “View and edit Peripheral Devices” on the Main Menu and press [ENTER]. Choose

“View Peripheral Device Status,” then press [ENTER] again. The device list displays.

Below is a list of peripheral devices (enclosure modules) supported by enclosure monitoring.

Monitoring of device status depends on enclosure implementation and is accessed through

different interfaces, e.g., SAF-TE, S.E.S., or I

C serial bus.

1. Device type

2. Enclosure descriptor

3. Power supply

4. Cooling element

5. Temperature Sensors

6. Audible alarm

7. Enclosure services controller electronics

Below is a screen display showing enclosure

devices through an I

C serial bus: