Specifications

148 en | Enclosure Management SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Fig. 9.7 Change Threshold for CPU Temperature
Select an item, such as “Trigger Thresholds for CPU Temperature Events.” Press [ENTER] and
a list of selections will appear. You can change the upper or lower threshold values. Press
[ENTER] to confirm.
Fig. 9.8 Enter Trigger Threshold Value
A configuration window will prompt. Enter any value within the safety range. Values exceeding
the safety range will be rejected by controller firmware.
Fig. 9.9 Warning Message for Out of Range
Follow the same method to modify other threshold parameters.