Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Enclosure Management | en 147
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
9.1.3 RAID Controller Self-monitoring
Open your PC Terminal Emulation screen. Enter the Main Menu and select “View and Edit
Peripheral Devices.” Use the arrow keys to scroll down and select “Controller Peripheral
Device Configuration,” “View Peripheral Device Status,” and then press [ENTER].
Fig. 9.5 View Peripheral Device Status
The controller operation status displays. The enclosure fan status is shown in the
Section 9.2.2 Enclosure Devices Status: View Peripheral Device Status..
Changing Monitoring Thresholds
Open your PC Terminal Emulation utility. Enter the Main Menu and select “View and Edit
Peripheral Devices.” Use the arrow keys to scroll down and select “Controller Peripheral
Device Configuration,” “Voltage and Temperature Parameters,” and confirm by pressing
[ENTER].
Note that it is not recommended to change the threshold values unless you need to coordi-
nate the RAID controller’s values with that of your RAID enclosure. If a value exceeding the
safety range is entered, an error message will prompt and the new parameter will be ignored.
For example, if the controller operates in a system enclosure where the upper limit on ambi-
ent temperature is relatively high or low, adjusting the default thresholds can coordinate the
controller status monitoring with that of the system enclosure.
Fig. 9.6 Set Trigger Thresholds
Scroll down and select an item to configure.