Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Host-side and Drive-side Parameters | en 139
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
8.2 Drive-side Parameters:
Fig. 8.11 Drive Side Parameters Screen
Choose “Drive-side Parameters,” then press [ENTER]. The Drive-side parameters menu dis-
plays.
8.2.1 Disk Access Delay Time
This feature sets the delay time before the subsystem tries to access the hard drives after
power-on. Default may vary 15 seconds to 30 seconds, and from one model to another. This
parameter can be adjusted to fit the spin-up speed of different models of disk drives installed
in your subsystem.
Fig. 8.12 Selecting Disk Access Delay Time
Choose “Disk Access Delay Time,” then press [ENTER]. A list of selections displays. Move the
cursor bar to a selection, then press [ENTER]. Choose Yes in the dialog box that follows to
confirm the setting.