Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Host-side and Drive-side Parameters | en 133
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
8.1.3 Maximum Queued I/O Count
This function allows you to configure the maximum queued I/O count the controller can
receive from the host computer.
Fig. 8.4 Maximum Queued I/O Count
Choose “Host-side Parameters,” then press [ENTER]. Choose “Maximum Queued I/O Count,”
then press [ENTER]. A list of available selections will appear. Move the cursor bar to an item,
then press [ENTER]. Choose Yes in the dialog box that follows to confirm the setting.
The controller supports the following Host-side configurations:
“Maximum Queued I/O Count,” “LUNs per Host ID,” “Num of Host-LUN Connect,” “Tag per
Host-LUN Connect,” “Peripheral Dev Type Parameters,” and “Cyl/Head/Sector Mapping Con-
fig.”
8.1.4 LUNs per Host ID
Fig. 8.5 LUNs per Host ID
Choose “LUNs per Host ID,” then press [ENTER]. A list of selections will appear. Move the cur-
sor bar to an item, then press [ENTER]. Choose Yes in the dialog box that follows to confirm
the setting.