Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Terminal Operation | en 129
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
7.15 View Drive Information
Fig. 7.74 View Drive Information Page
From the “View and Edit Drives” menu, select the drive that the utility is to be performed on,
then press [ENTER]. Select View drive information, then press [ENTER].
7.16 Drive Utilities
7.16.1 Drive Read/Write Test
From the “View and Edit Drives” menu, select a new or used drive that the utility is to be per-
formed on, then press [ENTER]. Select Drive Utilities, then press [ENTER]. Choose Read/Write
Test and press [ENTER]. You can choose to enable/disable the following options:
1. Abort When Error Occurs
2. Drive Test for - Read Only/Read and Write
3. Execute Drive Testing
Fig. 7.75 Drive Read/Write Test Page
When finished with the configuration, select Execute Drive Testing and press [ENTER] to pro-
ceed.
The Read/Write test progress will be indicated by a status bar.
Fig. 7.76 Disk Read/Write Testing Completion Percentage