Specifications

126 en | Terminal Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
7.14.3 Saving NVRAM to Disks
You can choose to backup your controller-dependent configuration information to disks. We
recommend using this function to save configuration information whenever a configuration
change is made. The information will be duplicated and distributed to all logical configura-
tions of drives.
At least a RAID configuration must exist for the controller to write your configuration data
onto it.
From the Main Menu, choose System Functions. Use the arrow keys to scroll down and select
Controller Maintenance, Save NVRAM to Disks, then press [ENTER].
Fig. 7.68 Save NVRAM to Disk Screen
Choose Yes to confirm.
A prompt will inform you that NVRAM information was successfully saved.
7.14.4 Restore NVRAM from Disks
Use this function to restore your NVRAM information that you previously saved onto disk.
From the Main Menu, choose System Functions. Use the arrow keys to scroll down and select
Controller Maintenance, Restore NVRAM from disks, and then press [ENTER].
Fig. 7.69 Restore NVRAM from Disks Screen
Press [ENTER] on one of the selections to confirm.
A prompt will notify you that the controller NVRAM data was successfully restored from disks.