Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Terminal Operation | en 123
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
7.13.6 Reset Controller
Fig. 7.63 Reset Controller Screen
To reset the controller without powering off the system, move the cursor bar to Reset Control-
ler, then press [ENTER]. Choose Yes in the dialog box that follows, then press [ENTER]. The
controller will now reset as well as power off or re-power on.
7.13.7 Shutdown Controller
Before powering off the controller, unwritten data may still reside in cache memory. Use the
“Shutdown Controller” function to flush the cache content. Move the cursor bar to Shutdown
Controller, then press [ENTER]. Choose Yes in the dialog box that follows, then press [ENTER].
The controller will now flush the cache memory.
Fig. 7.64 Shutdown Controller Screen
For Controller Maintenance functions, such as Download Firmware, see Section 15 System
Functions - Upgrading Firmware.
7.13.8 Adjust LCD Contrast
Fig. 7.65 Adjust LCD Contrast Page
The controller LCD contrast is set at the factory to a level that should be generally acceptable.
If changes are required, the controller is equipped with an LCD contrast adjustment circuit,