Specifications

104 en | Terminal Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
1. A list of LUN entries and their respective mappings will display. To map a host LUN to a
logical volume’s partition, select an available LUN entry (one not mapped yet) by moving
the cursor bar to the LUN, then press [ENTER].
2. A list of available logical volumes displays. Move the cursor bar to the desired logical unit,
then press [ENTER].
3. A list of available partitions will prompt. Move the cursor bar to the desired partition,
then press [ENTER]. If you have not partitioned the logical volume, the whole capacity
will be displayed as one logical partition.
4. When prompted to “Map Host LUN," press [ENTER] to proceed.
5. When prompted to "Map Logical Volume?,” select Yes to continue.
A prompt will display the mapping you wish to create. Choose Yes to confirm the LUN
mapping you selected.
The detail in the confirm box reads: partition 0 of logical volume 0 will map to LUN 0 of ID
0 on host channel 0.
Continue to map other partitions to host LUNs.
Once any host ID/LUN is successfully associated with a logical capacity, the “No Host
LUN” message in the LCD screen will change to “Ready.”
If your controller has not been configured with a host channel and assigned an ID.
Please proceed to Section 7.12 Viewing and Editing Channels .