Specifications

100 en | Terminal Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
Fig. 7.18 Selection Sub-menu
Use the arrow keys to select a sub-menu and change the initialization mode, write policy, or
the managing controller.
Logical volumes can be assigned to different controllers (primary or secondary). The default is
primary.
Fig. 7.19 Confirm Box
Note that if a logical volume is manually assigned to a specific controller, all its members’
assignments will also be shifted to that controller.
When all the member logical drives have been selected, press [ESC] to continue. The confirm
box displays. Choose Yes to create the logical volume.
Fig. 7.20 View Logical Drive Selection Box
Press [ENTER] on a configured volume, and the information of the created logical volume dis-
plays.
LV: Logical Volume ID
ID: Unique ID for the logical volume, randomly generated by the RAID controller
firmware
Size: Capacity of this volume
#LD: Number of the included members