Product specifications

Infortrend
4-22
5. When prompted to "Map Logical Volume?,” select Yes to continue.
A prompt will display the
mapping you wish to create.
Choose Yes to confirm the LUN
mapping you selected.
The detail in the confirm box
reads: partition 0 of logical
volume 0 will map to LUN 0 of
ID 0 on host channel 0.
Continue to map other partitions to host LUNs.
Once any host ID/LUN is successfully associated with a logical capacity,
the “No Host LUN” message in the LCD screen will change to “Ready.”
If your controller has not been configured with a host channel and assigned
an ID.
Please proceed to Section 4.13 Viewing and Editing Channels.
4.9 Assigning a Spare Drive and Rebuild
Settings
4.9.1 Adding Local Spare Drive
A spare drive is a standby drive automatically initiated by controller
firmware to replace a failed drive. A spare drive must have an equal or
larger capacity than the array members. A Local Spare should have a
capacity equal to or larger than the members of the logical drive it is
assigned to. A Global Spare should have a capacity equal to or larger
than all physical drives in a RAID subsystem.
Figure 4 - 35: Add Local Spare Drive Page