Product specifications

Terminal Operation
4-21
Multiple IDs on host channels are necessary for redundant controller
configuration. Details on creating multiple IDs and changing channel
modes will be discussed later. Choose a host ID by pressing [ENTER].
Figure 4 - 33: Host Channel/ID List
Choose the channel-ID combination you wish to map, then press [ENTER]
to proceed. Choose mapping a Logical Drive or a Logical Volume on the
drop box.
Figure 4 - 34: Mapping Result Page
1. A list of LUN entries and their respective mappings will display. To
map a host LUN to a logical volume’s partition, select an available
LUN entry (one not mapped yet) by moving the cursor bar to the LUN,
then press [ENTER].
2. A list of available logical volumes displays. Move the cursor bar to
the desired logical unit, then press [ENTER].
3. A list of available partitions will prompt. Move the cursor bar to the
desired partition, then press [ENTER]. If you have not partitioned
the logical volume, the whole capacity will be displayed as one logical
partition.
4. When prompted to “Map Host LUN," press [ENTER] to proceed.