Product specifications

Infortrend
4-10
including the array into a logical volume, before the array’s initialization
process is completed.
4.4.3.6 Stripe Size
Figure 4 - 12: Stripe Size Option Box
This option should only be changed by experienced engineers. Setting to
an incongruous value can severely drag performance, therefore, this
option should only be changed when you can be sure of the performance
gains it might bring you.
The default value is determined by the combination of the controller
Optimization Mode setting and the RAID level used for the array.
Press [ESC] to continue when all the preferences have been set.
Figure 4 - 13: Logical Drive Preferences Screen
A confirm box will appear on the screen. Verify all information in the box
before choosing Yes to confirm and proceed.
If the online initialization mode is applied, the logical drive will first be
created and the controller will find an appropriate time to initialize the
array.
The completion of array creation is indicated by the message prompt above.