Product specifications

Terminal Operation
4-1
Chapter
4
Terminal Operation
4.1 Power on RAID Enclosure
Hardware installation should be completed before powering on your RAID
enclosure. The subsystem and disk drives must be configured and properly
initialized before the host computer can access the storage capacity. The
configuration and administration utility resides in the controller's firmware.
Open the initial terminal screen: use the arrow keys to move the cursor bar
through the menu items, then press [ENTER] to choose the terminal
emulation mode, and [ESC] to return to the previous menu/screen.
Figure 4 - 1: RS-232C Initial Screen
NOTE:
All figures in this chapter are showing examples using the management
hyper terminal screen.