Product specifications

Infortrend
2-28
2.13.8 Adjust LCD Contrast
The controller LCD contrast is set at the
factory to a level that should be generally
acceptable. The controller is equipped
with an LCD contrast adjustment circuit
in case the factory-preset level needs to
be adjusted either via the RS-232
terminal emulation menus or using the
LCD keypad panel.
From the main menu, choose “View and
Edit Peripheral Dev.” Press ENT on it,
press arrow keys to scroll down, and
select “Adjust LCD Contrast,” press ENT
to proceed, and then use the arrow keys
to find an optimal setting. Press ESC to
return to the previous menu.
2.14 Controller Parameters
2.14.1 Controller Name
Select “View and Edit Config Parms” from
the Main Menu. Choose “View and Edit
Configuration Parameters,” “Controller
Parameters," then press ENT. The current
name will be displayed. Press ENT for two
seconds and enter the new controller name
by using the up or down arrow keys.
Press ENT to move to another character
and then press ENT for two seconds on
the last digit of the controller name to
complete the process.
2.14.2 LCD Title Display Controller Name
Choose “View and Edit Configuration
Parameters,” “Controller Parameters,”
then press ENT. Use the up or down
arrow keys to choose to display the
embedded controller logo or any given
name on the LCD initial screen.
Enter Ctlr Name:

Controller Name:
_ _ _ _
LCD Title Disp –
Controller Logo?
LCD Title Disp –
Controller Name?
View and Edit
Peripheral Dev
Adjust LCD
Contrast ..
LCD Contrast :
------