Product specifications

Infortrend
2-26
2.13.2.1 Change Password
To set or change the controller password,
press the up or down arrow keys to select
“Change Password,” then press ENT.
If the password has previously been set,
the controller will ask for the old
password first. If password has not yet
been set, the controller will directly ask for
the new password. The password cannot
be replaced unless the correct old
password is provided.
Press the up or down arrow keys to select
a character, then press ENT to move to the
next space. After entering all the
characters (alphabetic or numeric), press
ENT for two seconds to confirm. If the
password is correct, or there is no preset
password, it will ask for the new
password. Enter the password again to
confirm.
2.13.2.2 Disable Password
To disable or delete the password, press ENT on the first flashing
digit for two seconds when requested to enter a new password. The
existing password will be deleted. No password checking will occur
when entering the Main Menu from the initial terminal screen or
making configuration changes.
2.13.3 Reset Controller
To reset the controller without powering
off the system, Press the up or down
arrow keys to “Reset Controller,” then
press ENT. Press ENT again for two
seconds to confirm. The controller will
now reset.
2.13.4 Shutdown Controller
Before powering off the controller,
unwritten data may still reside in cache
memory. Use the “Shutdown Controller”
function to flush the cache content. Press
the up or down arrow keys to “Shutdown
Controller,” then press ENT. Press ENT
again for two seconds to confirm.
The controller will now flush the cache
memory. Press ENT for two seconds to
confirm and to reset or power off the
subsystem.
Change Password
..
Old Password
..
Re-Ent Password
..
Change Password
Successful
Reset This
Controller ..
Reset This
Controller ?
Shutdown This
Controller ..
ShutdownComplete
Reset Ctlr?
Shutdown This
Controller ?