Product specifications

LCD Keypad Operation
2-25
To AUTO?”, where “X” stands for the
channel number.
Use your arrow keys to display a data
rate value which ranges from 33 to
150MB/s (SATA drive channels).
Press ENT to confirm a selection.
2.13 System Functions
Choose “System Functions” in the Main Menu, then press ENT.
Press the up or down arrow keys to select a submenu, then press
ENT.
2.13.1 Mute Beeper
When the controller’s beeper has been
activated, choose “Mute Beeper," then
press ENT to turn the beeper off
temporarily for the current event. The
beeper will still activate on the next event.
2.13.2 Password
Use the controller’s password to protect the system from
unauthorized entry. Once the controller’s password is set,
regardless of whether the front panel, the RS-232C terminal
interface or the RAIDWatch Manager is used, the user can only
configure and monitor the RAID controller by providing the correct
password.
IMPORTANT!
• The controller requests a password whenever a user is entering
the main menu from the initial screen or a configuration change
is made. If the controller is going to be left unattended, the
“Password Validation Timeout” should be set to “Always
Check.”
• The controller password and controller name share a 32-
character space. The maximum number of characters for a
controller password is 32. If 31 characters are used for a
controller name, there will be only one character left for the
controller password and vice versa. Since 3.42J09, later
firmware revisions will support a 32-character space.
Mute Beeper
..
Set Chl=X Data
Rate to AUTO ?
Data Rate
..