Product specifications

LCD Keypad Operation

2-23

A list of host channel and host ID

combinations will appear. Use the up or

down arrow keys to select an ID you

wish to remove. Press ENT to select a

channel ID combination.

You will then be prompted by the

“Add Channel SCSI ID” option. Press

the down arrow key to proceed.

The “Delete Channel SCSI ID” option

will appear. Press ENT to display the

confirm box. Press ENT for two

seconds to remove the ID.

A prompt will remind you to reset the

subsystem for the configuration

change to take effect. You may press

ENT to reset the subsystem

immediately or you may press ESC to

continue adding other host IDs and

reset the subsystem later.

IMPORTANT!

• Every time you make changes to channel IDs, you must reset

the subsystem for the configuration to take effect.

• For IDs reserved in different subsystem configurations, please

refer to the Installation and Hardware Reference Manual

that came with your system. For subsystems featuring back-

end PCB connection, firmware can detect their board types

and automatically apply the preset IDs. There is no need to

set IDs for these models.

Change Setting

Do Reset Ctlr ?

CHL=0 ID=0

Add Channel SCSI

Delete Channel

SCSI ID ..

Delete ID=0