Product specifications

Infortrend
2-22
2.12 Viewing and Editing Channels
2.12.1 Viewing IDs
Press ENT for two seconds to enter the
Main Menu. Press the up or down arrow
keys to select "View and Edit Channels,"
then press ENT.
Channel information will be displayed.
Press ENT on the host channel you wish
the ID changed.
Press the up or down arrow keys to
select “Set SCSI Channel ID," then press
ENT.
Use the up or down arrow keys to
browse through the existing host IDs.
Press ENT on any ID combination to
continue.
2.12.2 Adding a Channel ID
Press ENT on a host channel, on “Set
Channel ID”, and then on an existing ID.
Use the up or down arrow keys to choose
“Add Channel SCSI ID", then press ENT.
Use the up or down arrow keys to choose
the ID you wish to add, then press ENT
for two seconds to complete the process.
A prompt will remind you to reset the
subsystem for the configuration change
to take effect. You may press ENT to
reset the subsystem immediately or you
may press ESC to continue adding other
host IDs and reset the subsystem later.
2.12.3 Deleting a Channel ID
Press ENT for two seconds to enter the
Main Menu. Press the up or down
arrow keys to select "View and Edit
Channels," then press ENT.
The first host channel should appear.
Press ENT to select a host channel.
Press ENT on “Set SCSI Channel ID..”
View and Edit
Channels 
CH0=Host ID=0
SXF=160M
Set SCSI Channel
ID ..
Add CHL=0 ID=0
?
CHL=0 ID=0
..
Add Channel SCSI
ID
Set SCSI Channel
ID ..
Change Setting
Do Reset Ctlr ?
CHL=Host ID=0
SXF=160M ..
View and Edit
Channels ↕