Product specifications

LCD Keypad Operation
2-13
you can map the whole capacity to a
host LUN.
Press ENT for two seconds when
prompted by “Map Host LUN” to
proceed.
Mapping information will be
displayed on the subsequent screen.
Press ENT for two seconds to confirm
the LUN mapping.
The mapping information will appear
for the second time. Press ENT or ESC
to confirm, and the host ID/LUN
screen will appear. Use the arrow keys
to select another ID or LUN number to
continue mapping your logical
configurations or press ESC for several
times to leave the configuration menu.
With any of the host ID/LUN successfully associated with a logical
capacity, the “No Host LUN” message in the initial screen will
change to “Ready.”
If you want to create more host IDs, please move to
Section 2.12 Viewing and Editing Channels for more details on
channel mode and channel IDs setting.
2.8 Assigning Spare Drive and Rebuild
Settings
2.8.1 Adding a Local Spare Drive
Press ENT for two seconds to enter the
Main Menu. Press the up or down
arrow keys to select "View and Edit
Drives," then press ENT.
Disk drive information will be
displayed on the LCD. Press the up or
down arrow keys to select a drive that
is stated as “NEW DRV” or “USED
DRV” that has not been included in
any logical drive, nor specified as a
LV=0 PART=0
700MB ?
CH0 ID0 LUN0
MAP to LV0 PRT0?
View and Edit
Drives 
Slot=* 1010MB
NEW DRV SEAGATE
Map Host LUN
..
CH0 ID0 LUN0
MAPto LV0 PRT0
CH=0 ID=0
..