Product specifications

Infortrend
2-10
Proceed to select one or more logical
drives. Press ENT to proceed. “LD” is
short for Logical Drive.
Use the up or down arrow keys to
browse through the logical drives. Press
ENT again to select/deselect the drives.
An asterisk (*) mark will appear when
the logical drive is selected. After all the
desired logical drive(s) have been
selected, press ENT for two seconds to
continue.
Two submenus will appear.
2.5.1 Initialization Mode
Array initialization can take a long time
especially for those comprised of large
capacity. Setting to “Online” means the
array is immediately accessible and that
the controller will complete the
initialization when I/O demands become
less intensive.
2.5.2 Write Policy
This menu allows you to set the
caching mode policy for this specific
logical volume. “Default” is a neutral
value that is coordinated with the
controller’s caching mode setting.
Other choices are “Write-back” and
“Write-through.”
When you are finished setting the
preferences, press ENT for two
seconds to display the confirm box.
Press ENT for two seconds to start
initializing the logical volume.
The logical volume has been successfully
created.
Press ESC to clear the message. Another
message will prompt; press ESC to clear it.
Logical volume information will be
displayed below.
LV=0 Selected To
Select LD Drives?
LG0 RAID5 DRV=3
2021MB GD SB=0
Create
Logical Volume ?
Lv=0 Creation
Completed
Initialization
Mode Online..
Write Policy
Default ..
Create Logical
Volume Successed
Lv=0 ID=07548332
0024488MB DRV=2