Product specifications

LCD Keypad Operation
2-7
available drives. Press ENT again to
select/deselect the drives. An asterisk
(*) mark will appear on the selected
drive(s). To deselect a drive, press
ENT again on the selected drive. The (*)
mark will disappear.
After all the desired drives have been
selected, press ENT for two seconds to
continue.
2.4.3 Logical Drive Preferences
You may also choose “Change Logical
Drive Parameter,” then press ENT to
change related parameters before
initializing the logical drive.
2.4.4 Maximum Drive Capacity
Choose “Maximum Drive Capacity,”
then press ENT. The maximum drive
capacity refers to the maximum capacity
that will be used in each member drive.
If necessary, use the up and down arrow
keys to change the maximum size that
will be used on each drive.
2.4.5 Spare Drive Assignments
The Local (Dedicated) Spare Drive can
also be assigned here. Press the up or
down arrow keys to choose “Spare Drive
Assignments,” then press ENT.
Available drives will be listed. Use the
up or down arrow keys to browse
through the drive list, then press ENT to
select the drive you wish to use as the
Local Spare Drive. Press ENT again for
two seconds.
2.4.6 Disk Reserved Space
This menu allows you to see the size of
disk reserved space. Default is 256MB.
2.4.7 Write Policy
This menu allows you to set the caching
mode policy for this specific logical drive.
“Default” is a neutral value that is
Change Logical
Drive Parameter?
Maximum Drive
Capacity ..
MaxSiz= 239367MB
Set to 239367MB?
Spare Drive
Assignments ..
Disk Rev. Space
256MB ..
Write Policy
Default ..
Slot=* 239367MB
New DRV SEAGATE
SLOT=1 239367MB
*
LG=0 SL
Slot=* 239367MB
*LG=0 SL SEAGATE