Product specifications

Infortrend
2-6
IMPORTANT!
• Drives of the same brand/model/capacity might not feature the
same block number.
• The basic read/write unit of a hard drive is a block. If members
of a logical drive have different block numbers (capacity), the
smallest block number will be taken as the maximum capacity
to be used in every drive. Therefore, use drives of the same
capacity.
• You may assign a Local/Global Spare Drive to a logical drive
whose members have a block number equal to or smaller than
the Local/Global Spare Drive but you should not do the
reverse.
2.4 Creating a Logical Drive
To create a logical drive, press ENT for
two seconds to enter the Main Menu.
Use the up or down arrow keys to
navigate through the menus. Choose
"View and Edit Logical Drives," and
then press ENT.
Press the up or down arrow keys to
select a logical drive entry, then press
ENT for two seconds to proceed. "LG"
is short for Logical Drive.
2.4.1 Choosing a RAID Level
Press the up or down arrow keys to
choose the desired RAID level, then
press ENT for two seconds. "TDRV"
(Total Drives) refers to the number of
all available drives.
2.4.2 Choosing Member Drives
Press ENT for two seconds; the
message, “RAID X selected To Select
drives”, will prompt. Confirm your
selection by pressing ENT.
Press ENT, then use the up or down
arrow keys to browse through the
View and Edit ↕
Logical Drives..
LG=0
Not Defined ?
TDRV=24 Create
LG Level=RAID6 ?
RAID 6 Selected
To Select drives
Slot=* 239367MB
New DRV SEAGATE