Product specifications

LCD Keypad Operation
2-5
IMPORTANT!
• Every time you change the caching parameters, you must reset
the controller for the changes to take effect.
2.3 View Connected Drives:
A RAID system consists of many physical drives that can be
modified and configured as the members of one or several logical
drives.
Press the front panel ENT button for two
seconds to enter the Main Menu. Use the
up or down arrow keys to navigate
through the menus. Choose "View and
Edit Drives," then press ENT.
Use the up or down arrow keys to scroll
down the list of connected drives’
information screens.
You may first examine whether there is any drive installed but not
shown here. If there is a drive installed but not listed, the drive may
be defective or not installed correctly. Please check your enclosure
installation and contact your system vendor.
Press ENT on a drive. Choose "View
Drive Information" by pressing ENT.
Use the up or down arrow keys to
navigate through the screens.
The Revision Number of the selected
drive will be shown. Press the down
arrow key to see other information.
Other information screens include "Serial
Number" and "Disk Capacity" (displayed
in blocks; each block equals 512K Bytes).
View and Edit
Drives
View Drive
Information ..
Revision Number:
0274
Slot=* 1010MB
New DRV SEAGATE