Product specifications

Event Messages
C-29
Message
Warning: UPS AC Power-Loss Detected
What Happens?
UPS AC power loss reported through the COM2 serial port
connection.
What to Do?
Contact your UPS supplier.
Message
Warning: UPS Battery Low - __%
What Happens?
UPS battery charge low, may not be able to support subsystem
during a power outage.
What to Do?
Wait for the UPS to recharge or you may use the Event Triggered
mechanisms implemented with firmware. These mechanisms
use conservative operation modes to reduce the chance of data
loss in the event of power outage. Contact your UPS supplier.
Message
SES(C0 I0)UPS 2: Device Not Supported!
What Happens?
Unrecognizable device type. This event may result from an
incorrect configuration with the SES remote device monitoring.
What to Do?
Check proper module installation and contact your RAID system
supplier.
C.7.2 Notification:
Message
SAF-TE Device(2) NOTICE: Fan Back On-Line(Idx:11)
What Happens?
A once missing or failed cooling fan is restored. This message is
reported through the SAF_TE monitoring device.
What to Do?
Press ESC to clear this message.
Message
NOTICE: Fan Module A Back On-Line(FAN0 _RPM)
What Happens?
A once missing or failed cooling fan is restored. This message is
reported through an I2C serial bus with RPM reading.
What to Do?
Press ESC to clear this message.
Message
Peripheral Device NOTICE: Fan Back On-Line
What Happens?
An I2C serial bus message indicating a once missing or failed
cooling fan is restored.
What to Do?
Press ESC to clear this message.
Message
Peripheral Set 0 Device NOTICE: FAN 1 Back On-Line
What Happens?
An individual cooling fan once missing or failed is restored.
What to Do?
Press ESC to clear this message.
Message
Peripheral Set 0 Device NOTICE: FAN 1 is Present
What Happens?
An individual cooling fan once missing or failed is restored.
What to Do?
Press ESC to clear this message.