Product specifications

Infortrend
C-24
Message
CHL:_ ALERT: Redundant Path for CHL:_ ID:_ Expected but
Not Found
What Happens?
One of the dual loop members may have failed or been disconnected.
This event is regenerated in the event when the one of dual loop
connections to an expansion enclosure can not be found after power-up.
Make sure all channels are properly connected and topological
configurations properly set.
What to Do?
Check cabling and system installation. A manual “Issue LIP”
command may restore the connection. Contact your supplier if
no connection errors could be found.
Message
CHL:_ ID:_ ALERT: Redundant Loop for CHL:_ ID:_ Failure
Detected
What Happens?
One of the dual loop members connecting device CHL:_ ID:_ may have
failed or been disconnected. Make sure all channels are properly
connected and topological configurations properly set.
What to Do?
Check cabling and system installation. Contact your supplier if
no connection errors could be found.
C.6.3 Notification:
Message
CHL:_ ID:_ NOTICE: Media Error Recovered-0xD8001C7C
What Happens?
Data once stored on bad drive sectors has been successfully
re-conducted from adjacent data blocks/stripes onto the original
drive blocks or distributed onto other healthy sectors.
** Infortrend firmware translates SATA error codes into SCSI
standard sense keys and sense codes. That’s the error codes at
the end of message.
What to Do?
Press ESC to clear the message.
Message
CHL:_ NOTICE: Fibre Channel Loop Connection Restored
What Happens?
Specific Fibre Channel loop connection restored.
What to Do?
Check proper host- or drive-side activities. Press ESC to clear the
message.
Message
CHL:_ ID:_ NOTICE: Redundant Path for CHL:_ Restored
What Happens?
Redundant path, one of the drive-side loop members, for CHL:_
ID:_ is restored.
What to Do?
Check proper host- or drive-side activities. Press ESC to clear the
message.
Message
CHL:_ NOTICE: Redundant Path for CHL:_ ID:_ Restored
What Happens?
The redundant path (CHL:_) connecting drive (CHL:_ ID:_) is
restored.
What to Do?
Check proper host- or drive-side activities. Press ESC to clear the
message.