Product specifications

Infortrend
C-22
Message
CHL:_ RCC Channel ALERT: Negotiation Error Detected
What Happens?
Negotiation errors occurred on the RCC channel CHL:_.
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ ID:_ Target ALERT: Negotiation Error Detected
What Happens?
Negotiation errors occurred with the communications with a
disk drive CHL:_ ID:_. The event could also occur with drive
target data bus sync/wide negotiation abnormality.
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ Drive Channel ALERT: Negotiation Error Detected
What Happens?
Negotiation errors occurred with the communications with a
drive channel CHL:_. The event could also occur with drive
target data bus sync/wide negotiation abnormality.
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ RCC Channel ALERT: Invalid Status/Sense Data
Received
What Happens?
Invalid status/sense data received on the RCC channel CHL:_
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ ID:_ Target ALERT: Invalid Status/Sense Data Received
(10B)
What Happens?
Invalid status/sense data received by a disk drive CHL:_ ID:_.
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ Drive Channel ALERT: Invalid Status/Sense Data
Received
What Happens?
Invalid status/sense data received on the drive channel CHL:_
What to Do?
Rare occurrence of these errors can be managed by firmware.
Contact your RAID system supplier.
Message
CHL:_ ALERT: Redundant Loop Connection Error Detected on
ID:_
What Happens?
One of the dual loop members might have failed or been
disconnected. Make sure all cabling are properly connected and
topological configurations properly set.
What to Do?
Check cabling and channel bus working conditions. If the
problem does not result from cabling problems, contact your
RAID system supplier.