Product specifications

Event Messages
C-15
Message
LG:0 Logical Drive NOTICE: Starting Off-Line Initialization
What Happens?
Creation process is completed, initialization process has begun to
generate parity sectors and readying member drives. The Off-line
initialization mode takes place immediately after the creation of a
logical drive, and does not allow host I/Os to be distributed to the
logical drive at the same time.
What to Do?
Press ESC to clear the message.
Message
LG:0 Logical Drive NOTICE: Off-Line Initialization of Logical
Drive Completed
What Happens?
Logical drive off-line initialization completed. The logical drive is
now ready for host ID/LUN mapping, and then receiving host
I/Os.
What to Do?
Press ESC to clear the message.
Message
LG:0 Logical Drive NOTICE: Starting On-Line Expansion
What Happens?
Start expanding the logical drive’s added or free capacity
(previously not included) when system find appropriate time after
selecting to expand its capacity. The On-Line mode allows the
added capacity of a logical drive to appear immediately as a usable
partition and ready for host I/Os. This partition may require
being associated with a separate ID/LUN on the host bus.
Response to host I/Os will be slower because the expansion
process requires distributing data blocks and parity data across
new drive sectors.
What to Do?
Press ESC to clear the message.
Message
LG:0 Logical Drive NOTICE: On-Line Expansion of Logical Drive
Completed
What Happens?
Logical drive on-line expansion completed. The added capacity
will appear as a new partition, and this partition may require
being associated with a separate ID/LUN on the host bus.
Adjustments should also be made through the host OS volume
management utility.
What to Do?
Press ESC to clear the message.
Message
LG:0 Logical Drive NOTICE: Starting Off-Line Expansion
What Happens?
Start expanding the logical drive’s added or free capacity
(previously not included) when system find appropriate time after
selecting to expand its capacity. The Off-Line mode does not allow
the added capacity of a logical drive to be immediately available
for host I/Os. This partition can only be associated with a
separate ID/LUN on the host bus after the expansion process is
completed. Access to the data already stored on the logical drive is
not affected.
What to Do?
Press ESC to clear the message.