Product specifications

Infortrend
C-8
C.4 Controller Events
C.4.1 Critical:
ALERT: +3.3V Low Voltage Detected(205.9V)
ALERT: Controller FAN 0 Low Speed Detected(0 RPM)
Controller NOTICE: Redundant Controller Firmware Updated
Controller ALERT: Redundant Controller Failure Detected
Controller SDRAM ECC Multi-bits Error Detected
Controller SDRAM ECC Single-bit Error Detected
Controller SDRAM Parity Error Detected
Controller PCI Bus Parity Error Detected
Controller ALERT: Power Supply Unstable or NVRAM Failed
BBU Absent or Failed!Correct It and Reset Ctlr to Take Effect
Controller BBU Absent or Failed! !
Controller BBU Failure Detected !
Controller BBU Thermal Shutdown/Enter Sleep-Mode !
C.4.2 Warning:
Memory Not Sufficient to Fully Support Current Config.
C.4.3 Notification:
Board1 Cold Temperature Back To Non-Critical LVs(0(C) )
+12V Upper Voltage Back within Acceptable Limits(0.0V)
+12V Lower Voltage Back within Acceptable Limits(0.0V)
Memory is Now Sufficient to Fully Support Current Config.
Controller NOTICE: NVRAM Factory Defaults Restored
Controller NOTICE: NVRAM Factory Defaults Restored
Controller NOTICE: NVRAM Factory Defaults Restored
Controller BBU is Charging !
NOTICE: Controller BBU Present !
NOTICE: Controller BBU Back On-Line !
NOTICE: Controller BBU Fully Charged !
Force Controller Write-Through on Trigger Cause