Product specifications

Infortrend
B-6
6. Send the Boot Record Binary to the controller. In
HyperTerminal, go to the "Transfer" menu and choose "Send
file." If you are not using Hyper Terminal, choose "Upload" or
"Send" (depending on the software).
7. After the Boot Record has been downloaded, send the
Firmware Binary to the controller. In HyperTerminal, go to
the "Transfer" menu and choose "Send file." If you are not
using Hyper Terminal, choose "Upload" or "Send" (depending
on the software).
8. When the Firmware completes downloading, the controller
will automatically reset itself. For a newer version of firmware,
you need to manually reset the subsystem/controller for the
new firmware to take effect.
B.3.3 Upgrading the Firmware Binary Only
Figure B - 4: Upgrading Firmware Binaries Using Hyper
Terminal Screen
1. From the Main Menu, scroll down to "System Functions."
2. Go to "Controller Maintenance."
3. Choose "Download Firmware."
4. Set ZMODEM as the file transfer protocol of your terminal
emulation software.
5. Send the Firmware Binary to the controller. In Hyper Terminal,
select "Send file." If you are not using Hyper Terminal, choose
"Upload" or "Send" (depending on the software).