Product specifications

Firmware Functionality Specifications
A-11
A.9 Environment Management:
SAF-TE/S.E.S. support
Supported. The SAF-TE/S.E.S. modules can
be connected to the drive channels. The RAID
controller will detect errors from SAF-
TE/S.E.S. devices or notify drive failures via
SAF-TE/S.E.S.
• Both SAF-TE/S.E.S. via drive and device-
self-interfaced methods are supported.
• Redundant SAF-TE/S.E.S. devices are
supported
• Multiple S.E.S. devices are supported
Dynamic on-lining of
enclosure services
Once an expansion unit (JBOD) with
supported monitoring interface is combined
with a RAID system, its status will be
automatically polled.
SAF-TE/S.E.S. polling
period
User configurable (50ms, 100ms, 200ms,
500ms, 1~60sec)
ISEMS (Infortrend Simple
Enclosure Management
Service)
Supported.
Multiple SAF-TE/S.E.S.
modules on the same
channel
Supported.
Multiple SAF-TE /S.E.S.
modules on different
channels
Supported.
Mapping SAF-TE/S.E.S.
device to host channel
for use with host-based
SAF-TE/S.E.S.
monitoring
Supported.
Event Triggered
Operation
When any of the following happens, the
firmware disables write-back caching to
minimize the chance of losing data:
- Battery, controller, cooling fan, or
PSU failure
- The upper temperature thresholds
are exceeded
- Low battery charge
- UPS AC loss or low battery
charge
The triggering factors are user-
configurable
Dual-speed cooling fan
control
Yes
Dual-LED drive status
indicators
Supported. Both single-LED and dual-LED
drive status indicators are supported.
SAF-TE/ S.E.S.
temperature value
display
Supported. Display the temperature value
provided by enclosure SAF-TE module (if
available).
On-board controller
voltage monitors
Supported. Monitors the 3.3V, 5V, and 12V
volta
g
e status. Event tri
gg
ered thresholds