Product specifications

Firmware Functionality Specifications
A-9
Load sharing
Supported. Workload can be flexibly divided
between different controllers by assigning logical
configurations of drives (LDs/LVs) to different
controllers.
User configurable
channel mode
Supported. Channel modes configurable (SCSI
or Fibre) as HOST or DRIVE on specific models
such as the EonRAID 2510FS and EonStor
F16F.
Require a special
firmware for redundant
controller?
No.
A.7 Data Safety:
Regenerate parity of
logical drives
Supported. Can be manually executed to ensure
that bad sectors do not cause data loss in the
event of drive failure.
Scheduled Media Scan
Revision 3.34 and above allows Media Scan to be
scheduled starting at a specified start time and
repeated at regularly timed intervals. The start
time and time intervals can be selected from
drop-down menus. Start time is manually
entered using its numeric representatives in the
following order [MMDDhhmm[YYYY]], and it
reads the date and time set for the controller’s
real-time clock.
The selectable time intervals (the Execution
Period) range from one (1) second to seven (7)
weeks.
Each such schedule can be defined to operate on
individual hard drives, all members of a
specified logical drive, or members of selected
logical drives. Each schedule can include up to
five (5) logical drives. The RS-232C terminal
interface and RAIDWatch revision 2.0 support
this functionality.
Bad block auto-
reassignment
Supported. Automatic reassignment of bad
block
Battery backup for
cache memory
Supported. The battery backup solutions provide
long-lasting battery support to the cache memory
when power failure occurs. The unwritten data in
the cache memory can be committed to drive
media when power is restored.
Verification on normal
writes
Supported. Performs read-after-write during
normal write processes to ensure data is properly
written to drives.
Verification on rebuild
writes
Supported. Performs read-after-write during
rebuild write to ensure data is
p
ro
p
erl
y
written to