Product specifications

Infortrend
1-6
Channel Mode:
Host Host channel mode
Drive Drive channel mode
Default SCSI Bus Sync Clock:
160M The default setting of this channel is
set to the 160Mhz mode
Async, 2.5 to 160Mhz Data rate can be manually configured
if the need arises
Available Host IDs:
* Multiple IDs applied (Host channel
mode only)
(ID number)
Controller is using this ID for host
LUN mapping.
NA No ID applied
1.7 Controller Voltage and Temperature
Press ENT for two seconds to enter the
Main Menu. Press the up or down
arrow keys to select "View and Edit
Peripheral Dev,” then press ENT.
Press the up or down arrow keys to
select "Ctlr Peripheral Device Config..”,
press ENT and then choose “View Ctlr
Periph Device Status..”, then press
ENT.
Press the up or down arrow keys to
choose either “Voltage Monitor”, or
“Temperature Monitor”.
Select “Temperature and Voltage
Monitor” by pressing ENT. Press the
up or down arrow keys to browse
through the various voltage and
temperature statuses.
View and Edit
Peripheral Dev
Voltage Monitor
..
[+12V] 12.077V
Op
eration Normal
View Ctlr Periph
Device Status..
Ctlr Peripheral
Device Config..
Temperature
Monitor ..