Product specifications

Data Integrity
7-11
Figure 7 - 16: Set for Disk Array Parameters
Select “View and Edit Configuration Parameters” on the Main
Menu and press [ENTER]. Choose “Disk Array Parameters,” then
press [ENTER] again. The Disk Array Parameters menu will appear.
7.4. 1 Rebuild Priority
Figure 7 - 17: Change Rebuild Priority
Choose “Rebuild Priority,” then press [ENTER]. A list of the
priority selections (Low, Normal, Improved, or High) displays.
Move the cursor bar to a selection, then press [ENTER].
7.4. 2 Verification on Writes
Errors may occur when a hard drive writes data. To avoid the write
error, the controller can force hard drives to verify written data.
There are three selectable methods: