Product specifications

Data Integrity
7-9
Select Logical Drives
Figure 7 - 13: Set for Logical Drive
Press [ENTER] on “Select Logical Drives” to bring out a sub-menu.
From there you may include all configured arrays or press [ENTER]
on “To Select Logical Drives” to select one or more specific logical
drive(s).
Logical drives can be tagged for inclusion by positioning the cursor
bar on the logical drive and then pressing [ENTER]. An asterisk (∗)
mark will appear on the selected physical drive(s). To deselect the
drive, press [ENTER] again on the selected drive. The “∗” mark
will disappear. Use the same method to select more logical drives if
required.
When selection is done, press [ESC] to continue.
7.2.3 Confirming the Creation of a Task Schedule
Figure 7 - 14: Enable Task Scheduler Function
When finished with setting the scheduler options, press [ESC] to
display a confirm box.
Verify all information in the box before choosing “Yes” to confirm
and to complete the configuration process.