Product specifications

Enclosure Management
9-5
Figure 6 - 5: View Peripheral Device Status
The controller operation status displays. The enclosure fan status is
shown in the 6.3.1 Enclosure Devices Status: View Peripheral Device
Status.
6.1.2.1 Changing Monitoring Thresholds
Open your PC Terminal Emulation utility. Enter the Main Menu
and select “View and Edit Peripheral Devices.” Use the arrow keys
to scroll down and select “Controller Peripheral Device
Configuration,” “Voltage and Temperature Parameters,” and
confirm by pressing [ENTER].
Note that it is not recommended to change the threshold values
unless you need to coordinate the RAID controller’s values with
that of your RAID enclosure. If a value exceeding the safety range is
entered, an error message will prompt and the new parameter will
be ignored.
For example, if the controller operates in a system enclosure where
the upper limit on ambient temperature is relatively high or low,
adjusting the default thresholds can coordinate the controller status
monitoring with that of the system enclosure.